To Attach The Hose; What To Put In Holding Tanks - Black Water Tank - Monaco DIPLOMAT 2004 Owner's Manual

Table of Contents

Advertisement

DIPLOMAT 2004
What to Put in
Holding Tanks -
Black Water Tank
6 • 254

To Attach the Hose:

1. Remove sewer hose from carrier.
2. Remove termination cap. Align coupler tangs
3. Attach the other end of the hose to the drain
4. Open the (small) grey water valve.
130013
The black water valve remains closed until the tank is full or until time of
departure. This will help prevent accumulation of solids. Use the outside faucet
or shower attachment for washing or rinsing.
NOTE: Close the grey water valve 24 hours prior to departing to
allow the tank to fill with liquid to help in the dumping process.
NOTE: Use care when connecting the sewer hose adapter to the
termination outlet in cold weather.
Before initially operating the toilet, treat the sewage holding tank with a
pre-charge of water and an odor-controlling chemical (available at most RV
supply stores). First, add approximately three gallons of water to the holding
tank. Next, mix the chemicals, in accordance with the manufacturer
instructions, with approximately one gallon of water. Pour mixture through
toilet to the holding tank. Be careful not to spill the chemical on your hands,
clothing, toilet bowl or carpet as it can permanently stain. Extremely hot
weather conditions may require adjusting the amount of chemical used to
control odor. Repeat the chemical pre-charge to the holding tank each time
the tank is cycled.
WARNING: Most chemical mixtures for holding tank odor control
are poisonous. Follow the product manufacturer's directions and
warnings when using any holding tank additive. Do not use any
products that contain petroleum distillate or ammonia in place of
RV odor controlling chemical. Petroleum distillate or ammonia will
damage the ABS plastic holding tanks and seals.
with termination tabs. Twist coupler clockwise
90º locking coupler to termination outlet.
service. Restrain hose to prevent movement
during use.
LUBE: Lubricate the O-ring on the sewer hose
adapter periodically with silicone spray.
WATER SYSTEMS

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents