Drum Brake Models - Monaco DIPLOMAT 2004 Owner's Manual

Drum Brake Models:

• Place wheel chocks firmly against the wheel before performing
this procedure.
• Remove the plug from the center of rear brake chamber on the
drive axle.
• Remove the caging tool from its holder on the brake chamber
and insert the tool into hole. Turn the tool clockwise to engage.
• Screw nut and washer onto caging tool. Use a wrench to tighten
the nut compressing the internal spring releasing the brake.
• Repeat procedure for the other side.
• After towing, or when air pressure is again available, loosen the
nut and remove the tool. Return the caging tool to its original
location and replace the plug.
• Repeat for the other side.
WARNING: Failure to securely chock the wheels can result
in the motorhome rolling when the spring brakes are
released. Severe injury or death can occur.
DRIVING & SAFETY
DIPLOMAT 2004
090369
2 • 71