Monaco DIPLOMAT 2004 Owner's Manual page 330

DIPLOMAT 2004
9 •330
NOTE: The solar panel (optional) will charge the batteries
with the disconnect switch off.
WARNING: When the frame or other welding is involved
for motorhome repair, or modification, the following pre-
cautions are required to protect electronic components in
the motorhome chassis:
1. Disconnect the (+) positive and (-) negative battery connection
and any electronic control ground wires connected to the
frame or chassis.
2. Cover electronic control components and wiring to protect
from hot sparks.
3. Disconnect the wiring harness connectors at the transmission
electronic control unit. The ECU is located in the front
roadside electrical compartment.
4. Do not connect welding cables to electronic control
components.
5. The welding ground cable should be attached no more than
two feet from the part to be welded.
ELECTRICAL SYSTEMS - CHASSIS
060193k