Air Coupler; To Remove Fitting - Monaco DIPLOMAT 2004 Owner's Manual

Provided for convenience is a remote air supply coupler located in the
generator compartment. This female fitting will accept type C automotive.
This auxiliary air fitting may be used to inflate tires, air mattresses or other
pneumatic items. This fitting is not designed to charge the air system on the
motorhome. The air supply for the auxiliary air fitting is charged from the
front air tank through a pressure protection valve.
To use this feature:
• Slide the locking collar back. Using a firm grip, fully insert the
air fitting into the auxiliary air supply. Release the locking collar
to retain the air fitting after the fitting is properly inserted.

To remove fitting:

• Firmly grip the air hose near the fitting to prevent recoil.
• Slide the locking collar back to release fitting.
NOTE: There are small air pressure restrictions in the
pressure protection valve and tire stem valve. Due to this
restriction, the maximum amount of tire pressure achieved
when the system is used to fill a tire is approximately
95-105 psi with air system on the motorhome charged to
120 psi. Maximum outlet air pressure is achieved when the
air system completes the fill cycle indicated by the purge
cycle of the air dryer.
CHASSIS INFORMATION
DIPLOMAT 2004
090435b

Air Coupler

10 • 363