Fresh Tank Fill; Gravity Fill - Monaco DYNASTY 2006 User Manual

Table of Contents

Advertisement

CAUTION:
Some outside water sources develop high water
pressure, particularly in mountainous regions.
High water pressure is anything over 55 psi
(pounds per square inch). Excessive water
pressure may cause leaks in water lines and/or
damage the water heater. An additional pressure
regulator can be connected to the city water faucet
to regulate the pressure to the potable water hose.
Excess pressure on a hot day can cause the water
hose to swell and burst.

Fresh Tank Fill

• Connect a potable water hose to the city/fresh water hook-up located in the service
center on the roadside of the motorhome.
• Turn the city water/tank fi ll valve to the Fresh Water Fill/Open position.
• Turn on the water supply.
• The water pump should be off.
• The water tank is full when water comes out
the tank overfl ow pipe located on the curbside
of the motorhome. Shut the water supply off
as soon as possible.
NOTE:
When filling the fresh water tank, do
not leave the hose unattended. Turn
water off immediately when water
appears from the overflow discharge on
the curbside, ahead of the drive axle.

Gravity Fill

The gravity fi ll inlet allows fl uids to be added directly into the fresh water tank. When dry camping, water can
be poured directly from a container into the fresh water tank. The gravity fi ll inlet can be used to pour disinfecting
solution into the fresh water tank. Use only potable water sources, solutions and delivery systems when using the
gravity fi ll inlet.
Filling the Tank:
1. Unscrew fi ll cap taking care to keep cap and inlet clean.
2. Insert potable water hose into inlet.
3. Fill tank until water overfl ows from inlet.
NOTE:
Do not leave the gravity fill inlet unattended when in use.
214 • SECTION 6 — WATER SYSTEMS
040460L
040527d
040573
040393b
Located at the top of the
Service Center
DYNASTY 2006

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents