Day/Night Shades; Spot-Cleaning; Ultrasonic Cleaning; Tub Cleaning - Monaco DIPLOMAT 2004 Owner's Manual

• Spot-Cleaning:

Spot-clean shades and blinds using a soft cloth or a moistened
sponge with lukewarm water. Add mild detergent, if needed.
Blot gently to avoid creasing. In a dusty environment, the blinds
may need to be cleaned regularly using a sponge or dampened
soft cloth. Use warm (not hot) water and a mild detergent. The
mild detergent cannot contain abrasives. Rinse the blinds using
a clean cloth and water to prevent water spots. Place a towel
directly under the blinds to absorb any water that might drip
down.

• Ultrasonic cleaning:

Professional ultrasonic cleaning may be preferred.

• Tub cleaning:

1. Immerse entire shade assembly in lukewarm water with
mild detergent. Wash for several minutes by gently moving
liquid around with your fingers.
2. Rinse with clear water.
3. Close shade before removing from rinse water.
4. Hold rails and tilt the shade to allow excess water to drain
off.
5. Re-install damp shade into window opening. Place a towel
directly under the blinds to absorb any water that might drip
down.
6. Lower shade all the way to allow it to dry completely.
The day/night shades are made of polyester blended material. Use the
following guidelines to care and maintain the day/night shades:
• Leave Day-Night shades in the UP position when not in use to
help shades hold their shape.
• String tension for the shades should be equal. The tension can be
adjusted if the shades will not remain up.
Dusting:
Vacuum with a brush attachment, or use a dusting tool, on a regular basis.
Cleaning:
A dry foam cleaner may be used for soil and dirt removal. Follow all
directions on the container or a cleaning solution of ¼ ounce clear liquid
soap to 8 ounces water.
NOTE: Do not use colored liquid soap as a stain may
appear when fabric dries.
EXTERIOR & INTERIOR CARE
DIPLOMAT 2004

Day/Night Shades

(Optional)
3 •141