Greasing; To Apply Grease - Monaco DIPLOMAT 2004 Owner's Manual

DIPLOMAT 2004

Greasing

3 •150
When preparing to use a high-pressure grease gun, thoroughly clean all
Zerk grease fittings before applying new lubricant. Keep paper towels or
disposable rags handy when greasing. When lubricating items such as drive
shafts and steer axles components, continued grease application is generally
required until new grease appears at exit points.
Some items use sealed boots around the component to prevent moisture
intrusion. When greasing these types of components care must be given to
prevent excess lubricant pressure from rupturing the seal.
WARNING: Always chock wheels before going underneath the
motorhome.
Brake actuating components require lubrication to keep the actuating
components operating freely. Avoid contaminating brake linings with
lubricant. Particular care and attention to details should be taken when
lubricating brake actuating components. Wheel removal may be necessary to
gain access the grease fittings.

To apply grease:

• Clean the grease fitting. Initially operate grease gun until new
lubricant discharges from nozzle then wipe nozzle clean. This
090368
avoids introducing contaminants into the component.
• Snap nozzle onto grease fitting.
• Nozzle must remain in line with the grease fitting during the
application process. If the nozzle is not in line, lubricant will
collect around nozzle and grease fitting, failing to lubricate the
component.
• Wrap the nozzle with a paper towel or rag to prevent
contamination and accidental soiling of other areas.
If the component does not accept grease the Zerk fitting may be plugged
or damaged. Zerk fittings are replaceable and generally available at most
auto supply stores. Zerk fittings come in variety of angles depending on
the application. Every effort should be made to lubricate the component,
as neglect will only result in premature component failure.
Typical Zerk Fitting.
NOTE: Some grease fittings may not be accessible until the steer-
ing wheel is turned or the motorhome is moved slightly.
EXTERIOR & INTERIOR CARE
090418