Water Tank - Fresh Fill; Water Tank - Fresh Gravity Fill - Monaco 2002 Diplomat Service Manual

Water Systems
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
WATER TANK -
FRESH FILL
The valve must be in the Fill Tank position
(as pictured) for fresh fill.
om040385.EPS
WATER TANK -
FRESH GRAVITY FILL
om040406.EPS
6 • 1 7 0
1. Cinfirm that the fresh water tank drain valve,
located on roadside in the service center, is in the closed
position.
2. Connect the hose labeled for potable water to the water
source. The water hose from the source to the motorhome
sometimes will not have a pressure regulator inline. On a
hot day the hose may expand and burst from water pressure
within the water hose.
3. Remove white plug in the end of the pressure regulator.
4. Connect the water hose to the City water inlet.
5. The valve should be in the Fresh Water Tank position.
6. Turn on the water at the water source. The water should
be audible as the fresh water tank fills.
7. Locate the monitor panel. Locate the switch marked test.
The switch is a momentary switch that requires the
switch to be held in position while testing the level in the
fresh water tank. Read the scale as the fresh water tank is
filling. When the 2/3 tank light illuminates it should not
take much longer to finish filling the tank. Do not leave
coach unattended while filling the fresh water tank. The
light marked "F" should start to blink as a warning that
the fresh water tank is almost full. Return to the service
center. When the fresh water tank is full water will come
out an overflow vent above the gravity fill cap.
8. Turn off water supply as quick as possible.
9. Return handle to "local supply."
The gravity fill inlet allows fluids to be introduced directly into the
fresh water tank. When dry camping water can be poured directly from a
container into the fresh water tank. The gravity fill inlet can be used to
pour disinfecting solution into the fresh water tank or when using potable
RV antifreeze to winterize the fresh water system. Use only potable water
sources, solutions and delivery systems when using the gravity fill inlet.
Filling the Tank:
1. Unscrew fill cap taking care to keep cap and
inlet clean.
2. Insert potable water hose into inlet.
3. Fill tank until water overflows from inlet.
NOTE: When filling tank do not leave hose unattended.
D I P L O M A T