To View Satellite Programming (Optional); To Listen To Tv & Vcr Through Surround Sound System - Monaco DIPLOMAT 2004 Owner's Manual

To View Satellite Programming (Optional):

• Turn ON the Front TV.
• Tune the TV to the VIDEO 1 input by pressing TV/VIDEO
button on the TV remote control, or by opening the front access
panel on the TV and pressing the TV/VIDEO button. VIDEO 1
will display on the TV.
• Turn ON The DVD receiver. Press the FUNCTION button on
the DVD remote control, or on the front panel of the DVD
receiver, until AUDIO 1 is displayed in the DVD display screen.
• Select position 2 on the Sony AV switch
• Turn ON the Satellite Receiver and acquire signal.
• The volume can be adjusted using the DVD remote control or by
turning the volume knob on the DVD Receiver.
The sound from the TV and VCR will be broadcast through the speakers
on the TV. The TV or VCR sound can be broadcasted through the optional
surround sound system. See below for set up instructions.
To Listen to TV & VCR Through Surround Sound System:
The cable or antenna signal must be tuned through the VCR to listen to
the sound through the surround sound system. Audio from a video tape may
also be broadcast through the surround sound system using the following
procedures:
• Turn ON the Front TV.
• Tune the TV to the VIDEO 1 input by pressing TV/VIDEO
button on the TV remote control, or by opening the front access
panel on the TV and pressing the TV/VIDEO button. VIDEO 1
will display on the TV.
• Turn ON the DVD Receiver. Press the FUNCTION button on
the DVD remote control or front panel of the DVD receiver until
AUDIO 1 is displayed in the DVD display.
• Select position 1 on the Sony AV selector box.
• Turn ON the VCR
• Insert Video Tape and push PLAY if necessary or tune to the
desired TV channel.
• The volume can be adjusted using the DVD remote control or by
turning the volume knob on the DVD Receiver.
EQUIPMENT
DIPLOMAT 2004
5 • 231