Removing Flywheel Magnet Assembly - Yamaha F115A Service Manual

POWR
Å
ı
Å
ı
FLYWHEEL MAGNET ASSEMBLY
5020
5030
5040
5050
CAUTION:
The major load should be applied in the
direction of the arrows. If the load is not
applied as shown, the flywheel holder may
easily slip off.
REMOVING THE FLYWHEEL MAGNET
ASSEMBLY
1. Remove:
• Flywheel magnet assembly nut
Flywheel magnet assembly
holder
YB-06139 / 90890-06522
Å For USA and Canada
ı For worldwide
2. Remove:
• Flywheel magnet assembly
Universal puller
YB-06117 / 90890-06521
Å For USA and Canada
ı For worldwide
CAUTION:
• Keep the nut side flush with the crank-
shaft end until the flywheel magnet
assembly comes off the tapered portion
of the crankshaft.
• To prevent damage to the engine or
tools, screw in the universal-puller set-
bolts evenly and completely so that the
universal-puller plate is parallel to the fly-
wheel magnet assembly.
5-2
E
5