Yamaha F115A Service Manual page 576

BRKT
TILT RAM ASSEMBLY AND GEAR PUMP UNIT
7420
7430
7300
2. Fill:
• Gear pump housing
Recommended power trim and
tilt fluid
ATF Dexron II
NOTE:
Add power trim and tilt fluid through the
hole a until the fluid level is to the top of
the gear pump unit.
3. Install:
• Tilt ram assembly
NOTE:
Place the tilt ram end screw at the bottom
of the tilt ram and install the tilt ram assem-
bly into the tilt ram cylinder.
4. Tighten:
• Tilt ram end screw
End screw wrench
YB-06548 / 90890-06548
Tilt ram end screw
130 Nm (13 m • kgf, 94 ft • lb)
7-47
E