Appendix
13 Appendix
13.1 Additional documents
•
Data sheet (D184S035Uxx)
Important
All documentation, declarations of conformity, and certificates are available in ABB's download
area.
www.abb.de/durchfluss
13.2 Approvals and certifications
CE mark
Explosion
Protection
124
The version of the meter in your possession meets the requirements of the
following European directives:
-
ATEX directive 94/9/EC
-
EMC directive 89/336/EEC
-
Pressure equipment directive (PED) 97/23/EC
Pressure equipment does not receive a CE mark indicating PED compliance
on the factory tag in the event of the following conditions prevailing:
-
The maximum permissible pressure (PS) is less than 0.5 bar
-
Due to low pressure risks (meter size ≤ DN 25 / 1") no approval procedures
are required.
Identification for intended use in potentially explosive atmospheres according
to:
-
ATEX directive
-
IEC standards
-
FM
Approvals for Canada and United States
c
us
FV4000-VT4/VR4 / FS4000-ST4/SR4
D184B097U02