Appendix; 10.1 Decommissioning And Packaging; 10.2 Additional Documents - ABB Sensyflow FMT700-P Operating Instruction

Appendix

Pos: 30.1 /Überschriften/1/A - C/Anhang @ 0\mod_1132904773022_3101.doc @ 3134 @ 11
10 Appendix
Pos: 30.2 /Überschriften/1.1/1-spaltig/A - C/Außer Betrieb setzen und verpacken @ 29\mod_1242206777268_3101.doc @ 270622 @ 2

10.1 Decommissioning and packaging

Pos: 30.3 /Anhang/Durchfluss/FMT500-IG/Außer Betrieb setzen und verpacken @ 29\mod_1242205819346_3101.doc @ 270494 @
Packaging the device ready for transport or return to the manufacturer
If the original packaging material is no longer available, wrap the device in bubble wrap or
corrugated cardboard and place it in a box of sufficient size lined with a shock-absorbing
material (e.g., foam rubber). The thickness of the padding should be appropriate for the device
weight and type of shipment. The box must be handled with care and labeled accordingly.
For overseas shipment, always add a desiccant (e.g., silica gel) and hermetically seal the
device plus desiccant in a layer of polythene that is 0.2 mm thick. Use an amount of desiccant
that is appropriate for the packing volume and the expected transport time (at least sufficient for
3 months). You should also line the box with a layer of union paper.
All devices returned to the manufacturer must be accompanied by a completed and signed
decontamination certificate (see Appendix). Without this, ABB will not be able to process the
return.
Pos: 30.4 /Überschriften/1.1/1-spaltig/V - Z/Weitere Dokumente @ 0\mod_1134369962894_3101.doc @ 3218 @ 22

10.2 Additional documents

Pos: 30.5 /Anhang/Durchfluss/FMT700-P/Weitere Dokumente @ 39\mod_1273483653352_3101.doc @ 336975 @
• Data Sheet 10/14-6.84
Pos: 30.6 /Überschriften/1.1/1-spaltig/V - Z/Zulassungen und Zertifizierungen @ 0\mod_1132230068395_3101.doc @ 3806 @ 22
10.3 Approvals and certifications
Pos: 30.7 /Anhang/Durchfluss/FMT700-P/Zulassungen und Zertifizierungen @ 39\mod_1273483785836_3101.doc @ 336999 @
CE mark
Pos: 30.8 /======= Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830 @
46
The version of the device as provided by us meets the requirements of the
following European directives:
- EMC Directive 2004/108/EC
- Low Voltage Directive 2006/95/EC
Sensyflow FMT700-P 42/14-42-EN