Show Link_Aggregation - D-Link DGS-3100 Series Cli Manual

show link_aggregation

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display Link Ag
DG S3100#
To display the current link aggregation configuration on the Switch.
show link_aggregation {gro
The show link_aggregation command displays the current link
aggregation configuration of the Switch.
group_id <value 1-32> − Specifies the group ID. The Switch allows
up to 32 link aggre
number identifies eac
None.
gregation configuration:
DGS3100# show link_aggre
Group ID : 1
Member Port : 5-7,9
A ctive Port :
Status : Disabled
DGS3100#
up_id <value 1-32>}
gation groups to be configured. The group
h of the groups.
gation
95