Using The Visual Fault Locator; Visual Fault Locator Applications - Fluke OF-500-10 Technical Reference Handbook

Visual Fault Locator Applications

The visual fault locator (VFL) is available with OFTM-573x
modules. The VFL helps you do the following:
•
Quickly check fiber continuity.
•
Trace fibers to determine the polarity of duplex
connections and identify connections between patch
panels.
•
Locate breaks and bad splices. These faults scatter
the locator's light, causing a red glow in the affected
area.
•
Reveal high-loss bends. If the locator's light is visible
around a bend in a fiber, the bend is too sharp.

Using the Visual Fault Locator

•
Reveal problems in connectors. A damaged fiber
inside a connector causes a red glow in the
connector.
•
Optimize mechanical splices and pre-polished
connectors: Before sealing the splice or connector,
adjust the fiber alignment for minimal glow where
the fibers meet. (Follow the manufacturer's assembly
instructions for splices and connectors.)
Chapter 7
7-1