Suzuki SWIFT RS415 2017 Service Manual page 1175

Rear Door Assembly Removal and Installation
Refer to "Front Door Assembly Removal and Installation: " as removal and installation procedures are basically the
same. However, note the following.
• Tighten rear door hinge bolts and nuts to specified torque referring to "Rear Door Assembly Components".
Rear End Door Assembly Components
1. Rear end door panel assembly
2. Rear end door window glass
3. Rear end door hinge
: Apply lithium grease 99000-25010 to door hinge
moving section.
: Apply sealant 99000-31110 to contact face.
Rear End Door Assembly Removal and
Installation
Removal
1) Remove rear end door trim (1).
2) Remove related section of head lining and rear trim.
3) Disconnect rear end door harness couplers (2) and
washer hose (3).
4) Remove rear end door balancers (4).
5) Remove door hinge nuts (5) and remove rear end
door assembly (6).
3
1
6
5
4. Rear end door balancer
5. Rear end door trim
6. Rear end door opening wether-strip
S4RS0A9A06010
Hood / Fenders / Doors:
2
(a)
4
: 23 N m (2.3 kg-m, 17.0 lb-ft)
1
6
"A"
"B"
"A"
4
5
2
3
9J-5
S4RS0A9A06008
S4RS0A9A06009
(a)
I4RS0A9A0010-
"A"
"A"
"A"
"A"
"A"
"A"
"B"
4
2
"A"
"B"
I4RS0A9A0011-