Advertisement
9E-16 Glass / Windows / Mirrors:
Door Mirror Removal and Installation
When removing or installing door mirror, refer to the
figure in "Door Mirror Components: ".
Power Door Mirror Switch Inspection
1) Remove driver side door trim referring to step 1) to
3) of "Front Door Glass Removal and Installation: ".
2) Remove power window main switch from door trim.
3) Check for continuity between terminals at each
switch position.
If check result is not as specified, replace door mirror
switch.
L
R
Up
Down
Left
Right
Recommended Service Material
Material
Grease
NOTE:
Required service material is also described in the following.
"Front Door Window Components: "
"Rear Door Window Components: "
S4RS0A9506022
S4RS0A9506023
A
E
C
D
G
B
F
B
A
C
D
G
E
F
I4RS0A950035-
Special Tools and Equipment
SUZUKI recommended product or Specification
SUZUKI Super Grease A
Power Door Mirror Actuator Inspection
1) Remove door trim referring to step 1) to 3) of "Front
Door Glass Removal and Installation: ".
2) Disconnect door mirror coupler (1).
3) Check that door mirror operates properly when
battery voltage is applied to connector terminals.
4) Connect battery positive (+) and negative (–)
terminal to the door mirror terminals as shown.
If it does not follow the table's operation, replace
door mirror assembly.
Terminal
A
Operation
Up
Down
Left
Right
C
P/No.: 99000–25010
S4RS0A9506024
B
C
1
A
B
I4RS0A950036-
S4RS0A9508001
Note
/
Advertisement
