Advertisement
Interior Trim
Floor Carpet Removal and Installation
Removal
1) Remove front seats and rear seats.
2) Remove seat belt lower anchor bolt.
3) Remove dash side trims, front side sill scuffs, center
pillar inner lower trims, rear side lower trims and rear
side sill scuffs.
4) Remove console box.
5) Remove floor carpet.
Installation
Reverse removal sequence to install front floor carpet,
noting the following instruction.
• For tightening torque of rear seat mounting bolt, refer
to "Rear Seat Components: in Section 9G".
• For tightening torque of front seat mounting bolt, refer
to "Front Seat Components: in Section 9G".
Head Lining Removal and Installation
WARNING:
Refer to "Air Bag Warning: in Section 00"
before starting service work.
Removal
1) Remove sun visor (1).
2) Remove room mirror (2).
3) Remove dome light (3).
4. Flat head driver
Repair Instructions
4) Remove front pillar trim (1), front side sill scuff (2)
S4RS0A9806001
and dash side trim (3).
5) Remove front seat belt upper anchor (1), center pillar
inner trim (2), center pillar inner upper trim (3) and
rear side sill scuff (4).
S4RS0A9806002
6) Remove tail end member trim (1).
I4RS0A980011-
[A]
"A"
4
2
"B"
"A"
[A]: With curtain air bag
[B]: Without curtain air bag
4. Forward
3
1
"A"
2
4
"B"
"A"
"A"
1
Interior Trim:
9H-1
[B]
"A"
"A"
1
1
"A"
3
"B"
I4RS0A980001-
"A"
"B"
I4RS0A980002-
"A"
"A"
"A"
I4RS0A980003-
Advertisement
