Advertisement
2
1
3
4) Check switch for resistance between "b" and "c"
terminals under each condition below.
If check result is not satisfactory, replace remote
audio control switch.
Tightening Torque Specifications
Fastening part
Instrument panel mounting bolts
Antenna base mounting nut
NOTE:
The specified tightening torque is also described in the following.
"Audio System Component Location: "
Reference:
For the tightening torque of fastener not specified in this section, refer to "Fasteners Information: in Section 0A".
"MODE",
All switches released (OFF): 4700 – 5600 k
c
b
a
"MODE" switch (4) pushing on (ON): 370 – 460
I4RS0A930031-
Specifications
Tightening torque
N m
23
10
Instrumentation / Driver Info. / Horn:
and
switch resistance
switch (5) pushing on (ON): 680 – 820
switch (6) pushing on (ON): 1400 – 1700
kg-m
lb-ft
2.3
17.0
1.0
7.5
9C-18
c
b
a
5
4
6
I4RS0A930033-
S4RS0A9307001
Note
Advertisement
