Advertisement
9B-7 Lighting Systems:
3) Align headlight aiming to specification by adjusting aiming gear if it is not set properly.
2. Headlight bulb
3. Cut line (bounding line)
4. Hot spot
5. Aiming gear (for up / down adjustment)
6. Turning (for up adjustment)
Headlight Switch (in Lighting Switch) Removal
and Installation
Removal
1) Disconnect negative cable at battery.
2) Remove steering column hole cover (1).
3) Remove steering column covers (2).
Turn steering wheel to remove steering column
cover screws (3).
3
4) Remove lighting switch (1) from combination switch
assembly (2) and disconnect its coupler (3).
7. Turning (for down adjustment)
8. Aiming gear (for right / left adjustment)
9. Turning (for right adjustment)
10. Turning (for left adjustment)
11. Headlight housing
S4RS0A9206004
2
Installation
Reverse removal procedure for installation.
1
I4RS0A920007-
X-X: Horizontal center line of headlight bulbs
A-A: Vertical center line of left headlight bulb
B-B: Vertical center line of right headlight bulb
[A]: Left headlight
[B]: Right headlight
1
3
I4RS0A920006-
2
I4RS0A920008-
Advertisement
