Suzuki SWIFT RS415 2017 Service Manual page 1237

Reference waveform No. 5
Oil pressure switch signal (1)
Measurement terminal CH2: "GE46-11" to "G33-3"
Oscilloscope setting CH2: 5 V / DIV
TIME: 10 ms / DIV
Measurement Engine is running and oil
condition pressure is in normal condition
Reference waveform No. 6
BCM – DLC CAN communication signal
Measurement terminal CH2: "G37-1" to "G33-3"
CH3: "G37-3" to "G33-3"
Oscilloscope setting CH2: 1 V / DIV
CH3: 1 V / DIV
TIME: 40 s / DIV
Measurement Ignition switch is at ON position
condition
1. CAN communication line signal (High)
2. CAN communication line signal (Low)
Reference waveform No. 7
BCM – combination meter CAN communication signal
Measurement terminal CH2: "G37-2" to "G33-3"
Oscilloscope setting
Measurement condition Ignition switch is at ON position
I4RS0AA20018-
Reference waveform No. 8
Information display serial communication signal (1)
Measurement terminal CH2: "G37-11" to "G33-3"
Oscilloscope setting
Measurement
condition
I4RS0AA20019-
Body Electrical Control System:
CH3: "G37-4" to "G33-3"
CH2: 1 V / DIV
CH3: 1 V / DIV
TIME: 40 s / DIV
1. CAN communication line signal (High)
2. CAN communication line signal (Low)
CH2: 5 V / DIV
TIME: 2 ms / DIV
Ignition switch is at ON position
10B-37
I4RS0AA20020-
I4RS0AA20021-