Advertisement
9B-11 Lighting Systems:
Front Fog Light Bulb Replacement
WARNING:
• To avoid danger of being burned, don't
touch when the bulb is hot.
• Don't touch glass surface of bulb to avoid
deteriorate as the case may be unclear
when bulb light on at dirty condition.
1) Remove fog light referring to "Front Fog Light
Assembly Removal and Installation: ".
2) Remove fog light bulb (1) as shown.
1
3) Replace fog light bulb and assemble all removed
parts.
Front Fog Light Switch Inspection
NOTE:
Front fog lights light up only when headlight
switch is in HEADLIGHT position (low or high
beams) or SMALL position. Front fog lights
turn OFF automatically when headlight
switch is turned to OFF position. If front fog
light switch holds ON position, front fog
lights turn ON automatically when headlight
switch is tuned to HEADLIGHT position (low
or high beams) or SMALL position again.
Check for continuity between terminals at each switch
position. If check result is not as specified, replace
switch.
S4RS0A9206017
Switch Position
ON (PUSH IN)
Front Fog Light Relay Inspection
1) Check that there is no continuity between terminal
"3" and "4". If there is continuity, replace relay.
2) Connect battery positive (+) terminal to terminal "2"
of relay.
I4RS0A920020-
3) Connect battery negative (–) terminal to terminal "1"
of relay.
4) Check continuity between terminal "3" and "4". If
there is no continuity when relay is connected to the
S4RS0A9206018
battery, replace relay.
1
2
3
4
5
Terminal
2
3
OFF
"3"
"1"
"2"
"4"
1
5
4
I4RS0A920021-
S4RS0A9206009
I4RS0A920022-
Advertisement
