Advertisement
Condition
Sound skips or is noisy
CD player is operative,
but all speakers does not
sound
Individual speaker is
noisy or inoperative
Sound quality or volume
is poor
Remote Audio Control Switch (If Equipped) Symptom Diagnosis
Condition
Audio system is
operative, but remote
control switch does not
control audio system
Ignition Switch Removal and Installation
Removal
1) Disconnect negative cable at battery.
2) Confirm that ignition key is removed.
3) Remove steering column hole cover (1).
4) Turn steering wheel to remove steering column
cover screws (3) and then remove steering column
covers (2).
3
5) Disconnect couplers (1) from ignition switch (2).
6) Remove ignition switch (2) from key cylinder (3).
Possible cause
CD-ROM faulty
Driving vibration
Water droplets form on internal lens
Radio assembly installed incorrectly
Radio assembly faulty
Wiring and/or grounding faulty
Radio assembly faulty
Wiring and/or grounding faulty
Speaker faulty
Radio assembly faulty
CD-ROM faulty
Wiring and/or grounding faulty
Speaker installed incorrectly
Speaker faulty
Possible cause
Remote audio control switch faulty
Contact coil faulty
Wiring and/or grounding faulty
Radio assembly faulty
Repair Instructions
S4RS0A9306001
2
1
I4RS0A920007-
Instrumentation / Driver Info. / Horn:
Correction / Reference Item
—
—
Dry about 1 hour with power on.
Install correctly.
Replace radio assembly.
Repair as necessary.
Replace radio assembly.
Repair as necessary.
Replace speaker.
Replace radio assembly.
—
Repair as necessary.
Install correctly.
Replace speaker.
Correction / Reference Item
Check remote audio control switch referring to
"Remote Audio Control Switch Inspection: ".
Replace contact coil.
Repair as necessary.
Replace radio assembly.
2
1
Installation
Reverse removal procedure.
9C-10
S4RS0A9304014
1
3
I4RS0A930008-
Advertisement
