Advertisement
Alarm Indicator Lamp
The information display (1) of this vehicle includes an alarm indicator lamp (2) for the theft preventive purpose. The
BCM makes the alarm indicator lamp flash at certain intervals after the ignition switch is turned off until it is turned on
again. Also, to check DTCs stored in BCM without using a SUZUKI scan tool when diagnosing troubles, it is possible
to identify them by flashing patters of the alarm indicator lamp.
Body Electrical Control System Wiring Circuit Diagram
NOTE:
This wiring diagram shows circuits related to only BCM, not the entire circuits of BCM and junction
block. Refer to "Power Supply Diagram: in Section 9A" for wiring circuits other than the figure below.
1
Schematic and Routing Diagram
Body Electrical Control System:
2
I4RS0AA20031-
10B-3
S4RS0AA202001
Advertisement
