Changing Factory Default Settings - Miele H6260BP Operating And Installation Instructions

Changing factory default
settings
Your appliance is supplied with a
number of standard default settings
(see the "Settings overview" chart).
A setting is changed by altering its
status.
Settings can only be changed when
the oven is switched on and the rotary
selector is at .
 Select .
 If necessary, use the rotary
selector   to move the triangle 
until it appears under .

  

 Confirm with OK.
A setting will appear:

 If you wish to change another setting,
use the rotary selector   to select
the appropriate number.
 Confirm with OK.
The setting is selected and the current
status appears, e.g.  
To change the status:
 Use the rotary selector   to select
the status you want.
 Confirm with OK.
The selected status is saved and the
setting appears again.
 If you want to change further settings,
proceed as described above.
 Select  if you have not changed
one setting and wish to switch to
another.
 If you do not want to change any
further settings, select .
The settings remain in the memory
even after a power cut.


Settings

37