Miele H6260BP Operating And Installation Instructions page 113

Problem
A function has been
selected but the oven is
not working.
 will appear in the
display with the
triangle  flashing
under .
 appears
unexpectedly in the
display and  is
flashing at the same
time. The buzzer might
also be sounding.
  appears in the
display.
  appears in the
display.
  appears in the
display.
Possible cause and remedy
There has been a power cut which has caused a
current cooking process to stop.
 Turn the function selector to the • position and
switch the oven off. Start the cooking process
again.
The power supply was interrupted for longer than 200
hours.
 Reset the time of day (see "Using for the first
time").
The oven has been operating for an unusually long
time and this has activated the safety switch-off
function.
 Turn the function selector to • and switch off the
oven. The oven is now ready to use again
immediately.
The Pyrolytic cleaning programme door lock is not
locking.
 Turn the function selector to the • position and
select the Pyrolytic programme you want again.
If the problem persists, contact Miele.
The door lock for the Pyrolytic cleaning programme is
not being released.
 Turn the function selector to the • position and
turn the oven off.
If the problem persists, contact Miele.
There is a problem that you cannot resolve.
 Call Miele.
Problem solving guide
113