Shelf Runners - Miele H6260BP Operating And Installation Instructions

Shelf runners

Shelf runners for accessories (trays,
racks, FlexiClip telescopic runners etc.)
are fitted on either side of the oven
cavity for shelf levels .
The shelf level numbers are indicated
on the front of the oven frame.
Each shelf runner has two rails:
– Accessories (e.g. the rack) are
pushed into the oven between the
two rails.
– FlexiClip telescopic runners
(depending on model) are fitted on
the lower rail.
The shelf runners can be removed for
cleaning (see "Cleaning and care").
Baking tray, universal tray and rack
with non-tip safety notches
Baking tray HBB 71:
Universal tray HUBB 71:
Rack HBBR 72:
Insert these accessories into the shelf
runners between the two rails of a shelf
level.
Always place the rack with the loading
surface in the lower position and the
non-tip safety notches towards the
back.
Non-tip safety notches are located on
accessories to prevent the trays being
pulled out completely when you only
wish to pull them out partially. They also
prevent trays from tipping.
– The non-tip safety notches are
located in the middle of the short
sides of the baking tray and universal
tray.
– The non-tip safety notches are
located towards the back of the short
sides of the rack.
If you are using the universal tray with
the rack on top, insert the tray between
the rails of a shelf runner and the rack
will sit on top of it.
Features
25