Changing Factory Default Settings - Miele TX3587 Operating And Installation Instructions

Changing factory default
settings
Settings can only be changed when
the oven is switched on and the
rotary selector is at ß.
Your appliance is supplied with a
number of standard default settings
(see the "Settings overview" chart).
A setting is changed by altering its
status.
^ Touch X.
^ If necessary, use the rotary selector
to move the triangle V until it
appears under X.
P
X + 0
V
^ Touch the OK sensor.
P i will appear:
P
^ If you wish to change another setting,
use the rotary selector to select the
appropriate number.
^ Touch the OK sensor.
The setting is selected and the current
status appears, e.g. S 0.
To change the status:
^ Use the rotary selector to select the
status you want.
^ Touch the OK sensor.
The selected status is saved and the
setting appears again.
If you want to change further settings,
proceed as described above.
Touch # if you have not changed one
setting and wish to switch to another.
^ Touch X if you do not want to
change any more settings.
The settings remain in the memory
even after a power cut.
i
s 0
Settings
39