Miele H6260BP Operating And Installation Instructions page 10

Warning and Safety instructions
Technical safety

Repairs and other work by unqualified persons could be
dangerous. Installation, maintenance work and repairs to electrical
appliances must only be carried out by a Miele approved service
technician.

A damaged appliance is dangerous. Check it for any visible
damage. Never install or attempt to use a damaged appliance.

Reliable and safe operation of this oven can only be assured if it
has been connected to the mains electricity supply.

The electrical safety of this appliance can only be guaranteed
when continuity is complete between it and an effective earthing
system. It is most important that this basic safety requirement is
present and tested regularly and, where there is any doubt, the
household wiring system should be inspected by a qualified
electrician.

Before connecting the appliance to the mains supply, make sure
that the rating on the data plate (voltage and frequency) corresponds
to that of the household supply.
This data must correspond in order to avoid risk of damage to the
appliance. Consult a qualified electrician if in any doubt.

Do not connect the appliance to the mains electricity supply by a
multi-socket unit or an extension lead. These do not guarantee the
required safety of the appliance (e.g. danger of overheating).

For safety reasons, this appliance may only be used when it has
been built in.

This oven must not be installed and operated in mobile
installations (e.g. on a ship).

Tampering with electrical connections or components and
mechanical parts is highly dangerous to the user and can cause
operational faults.
Do not open the outer casing of the appliance.
10