Miele H6260BP Operating And Installation Instructions page 115

Problem
Browning is uneven.
There is soiling in the
oven after the Pyrolytic
cleaning programme.
The rack and other
accessories make a
noise when being
pushed into or pulled
out of the oven.
The oven lighting
switches off after a
short time.
Possible cause and remedy
The wrong temperature or shelf level was selected.
 There will always be a slight unevenness. If the
unevenness is pronounced, check whether the
correct temperature and shelf level have been
selected.
The material or colour of the baking tin is not suitable
for the oven function.
 With Conventional Heat  light-coloured, shiny
tins are less suitable. Use matt, dark-coloured tins.
The Pyrolytic cleaning programme burns off soiling in
the oven and leaves it as ash.
 Remove the ash using warm water with a little
washing-up liquid with a soft sponge or a clean,
damp microfibre cloth.
If coarse soiling remains, run the Pyrolytic cleaning
programme again. Select a longer duration if
necessary.
The pyrolytic resistant surface of the shelf runners
creates friction when accessories are being pushed
into or pulled out of the oven.
 To reduce the friction, add a few drops of heat
resistant cooking oil to some paper towelling and
use this to lubricate the shelf runners. Do this after
every Pyrolytic cleaning programme.
The oven lighting is set to switch off after 15 seconds
(default setting). This default setting can be changed
(see "Settings –  ").
Problem solving guide
115