Miele H6267B Quick Start Manual

fold here
Moisture Plus Automatic programmes
Oven function: Moisture Plus Using Automatic programmes
ĺ Confirm with OK.
Use only fresh tap water when cooking Please see the "Culinario" recipe book for
with the Moisture Plus function. Automatic programme recipes.
The water intake process will begin.
ĺ Fold up the intake pipe and close the
TIP: Use the recipes as a guide. A 1 Prove dough
ĺ Fill a suitable container with the amount
A 2 White bread
door.
of water required: A 3 Flatbread
You will hear the pump briefly.
– Automatic burst of steam A 4 White bread in tin
 approx. 100 ml Danger of injury!
A 5 Rye bread
Steam can cause scalding. Do not open
A 6 Multigrain bread
– Manual burst of steam the door during a burst of steam.

If you have selected , the burst of A 7 Yeast rolls
approx. 100 ml

approx. 200 ml A 8 Butter cake
 steam is injected automatically after the
approx. 300 ml
heating-up phase. A 9 Plaited loaf
ĺ Select the Moisture Plus  function. ĺ Continue cooking until the end of the
A 10 Bream / Snapper
 will appear with the triangle  flas- programme.
A 11 Ocean trout
If you have selected ,  or  bursts of
A 12 Salmon fillet
hing under the  symbol.
ĺ The other burst of steam options , , 
steam, the number of bursts of steam
A 13 Blue grenadier fillet
that can be injected appears in the dis-
can be selected using the rotary selec- A 14 Trout
tor   (the function  starts the desca- play after the heating-up phase.
ĺ Touch  to inject the burst of steam.
A 15 Fillet of beef: rare
ling process).
A 16 Fillet of beef: medium
The sensor light goes out and the tem-
The recommended temperature will appe-
ar in the display with the triangle  flas- A 17 Fillet of beef: well-done
perature and the  symbol appear in the
A 18 Pork casserole
display.
hing under .
ĺ Proceed as described to inject further
ĺ Use the rotary selector   to change A 19 Saddle of venison
bursts of steam.
A 20 Saddle of lamb
the temperature if necessary.
ĺ Confirm with OK. A 21 Chicken breast with herbs
After the last burst of steam,  will go out
and the temperature will be displayed.
A 22 Chicken thighs
ĺ Continue cooking until the end of the
The prompt to draw in water appears. The
triangle  will flash under .
A 23 Turkey thighs
programme.
ĺ Open the door and pull the intake pipe A 24 Potato gratin
A 25 Lasagne
At the end of the cooking process:
forwards.
ĺ Turn the function selector to . ĺ Fill a container with the amount of fresh
ĺ Take the food out of the oven.
tap water specified in the recipe.
ĺ Select the Automatic  function.
ĺ Switch the oven off.
ĺ Turn the rotary selector   until the
Useful tip: When   appears in the dis-
number of the Automatic programme
play you can use Moisture Plus ten more you want to use appears in the display.
ĺ Confirm with OK.
times before the steam injection system
must be descaled.
With some Automatic programmes
ĺ Immerse the end of the water intake pipe
you will now be prompted to enter the
weight  of the food.
in the container with tap water.
fold here
fold here
Cleaning and care
Cleaning the oven Evaporating residual moisture
ĺ Use the rotary selector   to enter the
Please refer to the operating and ins- If a programme using the addition of
weight. tallation instructions for more detailed moisture is manually interrupted before all
ĺ Confirm with OK.
information on cleaning and care. the bursts of steam have been injected or
All surfaces of this appliance are su- if there is a power cut, the water for these
The prompt to draw in water appears. The
triangle  will flash under . sceptible to scratching. unused bursts of steam will remain in the
steam injection system.
ĺ Open the door and pull the intake pipe Remove any soiling immediately to pre-
vent a permanent discolouration or alte-
It is best to start the evaporation of re-
forwards. ration of the surface.
sidual water straight away so that only
ĺ Immerse the end of the water intake pipe
fresh water is used during the next coo-
Surfaces of the oven compartment
in the container with tap water.
and different accessories treated with king programme.
ĺ Confirm with OK.
PerfectClean enamel are characterised by
Carrying out residual moisture evapo-
their exceptional non-stick properties and
ration
The water intake process will begin.
ease of cleaning.
ĺ Fold up the intake pipe and close the door.
Danger of injury!
To clean them by hand, you can
Steam can cause scalding. Do not open
You will hear the pump briefly.
– remove the door the door while the residual water is being
In Automatic programmes without – dismantle the door evaporated.
ĺ Select the Moisture Plus  or the Au-
pre-heating a dash will appear in the dis-
– remove the FlexiClip telescopic runners
play briefly, followed immediately by the
tomatic  function.
– remove the shelf runners
cooking duration.
A time, depending on the amount of resi-
– lower the top heat/grill element
In Automatic programmes with pre-
dual water present, will appear and the tri-
– remove the catalytic enamelled back panel angle  will flash under the  symbol.
heating wait until the pre-heating phase
has finished. At the end of the pre-heating phase    will appear in the display.
Danger of burning! During the evaporation process, the dura-
Make sure the oven heating elements
tion may be adjusted by the system ac-
ĺ Open the door.
are switched off. Make sure the oven cording to the amount of water current-
ĺ Place the food on shelf level 2 and clo-
has cooled down. ly present.
ĺ Confirm with OK.
ĺ Clean the oven front, the interior and
se the door.
the door with a clean sponge and a so-
The Automatic programme will start. The The residual moisture evaporation pro-
lution of warm water and washing-up li-
bursts of steam will be injected automati- cess will start.
quid, or with a clean, damp microfib-
cally. At the end of the process:
re cloth. –  will appear in the display if you
ĺ Wipe dry with a soft cloth.
Danger of injury!
have selected Moisture Plus .
Steam can cause scalding. Do not open
the door during a burst of steam. Catalytic enamel inside the oven with
– The selected Automatic programme will
grease deposits will self-clean when high
appear in the display if you have selec-
At the end of the cooking duration:
temperatures are used.
–  will appear and  will flash. ted Automatic .
ĺ Any residual soiling can be removed
ĺ Turn the function selector to .
– A buzzer will sound if the buzzer is swit- with a solution of warm water and was-
ched on. hing-up liquid applied with a soft brush. While the residual water is evapora-
ĺ Leave all parts to dry.
ĺ Turn the function selector to .
ting, the moisture will condense on the
ĺ Take the food out of the oven. door and in the oven interior. It needs
The accessories are not dishwasher-sa- to be wiped off after the oven has coo-
ĺ Switch the oven off.
led down.
fe.
fold here
fold here fold here
Settings Problem solving guide
Settings overview
Settings Status (* factory default setting) Most minor problems which may occur during daily operation can be rectified without contacting Miele. The following guide is intended to help you do this.
    *
Contact Miele if you cannot identify the cause of a problem or resolve it yourself.
Time of day display Off
 
On
Problem
   
Signal tones volume Off
  to   On (  *) The display is dark.
    *
Keypad tone   Off
A function has been selected and
On
the time of day and the  symbol
   *
are still showing in the display.
Clock format 24-hour format

12-hour format
The oven does not heat up.
  ° *
 appears with  flashing
Temperature unit Degrees Celsius
°
Degrees Fahrenheit
under  .
    *
Unit of weight g (weight is shown in grams)
  A function has been selected but
lb/oz (weight is shown in pounds and ounces)
the oven is not working.
    to   Minimum brightness to maximum brightness (  *)
 appears unexpectedly in
Display brightness
    *
Lighting On for 15 seconds the display and  is flashing at
 
On the same time. The buzzer might
    * be sounding.
  appears in the display.
Demo mode   deactivated
activated
  
A noise can be heard after a coo-
Changing settings king process.
No water is being taken in with
Your appliance is supplied with a number of
factory default settings. A setting  is chan-
Moisture Plus  function or
 
°C °F with Automatic programmes.
  and  appear in the display. The Moisture Plus function and the Automatic pro-
ged by altering its status. 
h:min
ĺ Turn the function selector to .
       

ĺ Select .
The oven has switched itself off.
ĺ If necessary, use the rotary selector   The setting is selected and the current status appears, e.g.  .
Rust-like spots appear on cata-
to move the triangle  until it appears   
lytic surfaces.
To change the status:
under .
ĺ Use the rotary selector   to select
Cakes and biscuits are not suffi-
the status you want. ciently baked after following the
  °C °F ĺ Confirm with OK. times given in the baking chart.
 h:min
        The selected status is saved and the set-

Browning is uneven.
ting appears again.
ĺ Confirm with OK.
ĺ To change further settings, proceed in
A setting will appear, e.g.  .
the same way.
ĺ Select  if you do not want to change
ĺ If you wish to change another setting,
The oven lighting does not switch on. The halogen lamp is faulty and needs replacing.
a setting and wish to switch to another.
use the rotary selector   to select the
ĺ If you do not want to change any further
appropriate number. The FlexiClip telescopic runners
ĺ Confirm with OK. do not push in or pull out smoo-
settings, select .
thly.
fold here fold here
fold here
Cause Remedy
– The time of day display is deactivated. – Check the settings for the time of day and change them if necessary.
– There is no power to the oven. – Check if the circuit breaker has tripped. If it has, contact a qualified electrician or Miele.
The system lock  is switched on. Switch off the system lock (see "Operating and installation instructions").
Demo mode is activated.  appears in the display.
Deactivate Demo mode (see "Operating and installation instructions").
The power supply was interrupted for longer than Reset the time of day (see "Using for the first time").
200 hours.
There has been a power cut. This has caused the Turn the function selector to  and switch the oven off.
current cooking process to stop.
Restart the programme.
The oven has been operating for an unusually long Turn the function selector to  and switch the oven off.
time and this has activated the safety switch-off fun-
The oven is ready for use again immediately.
ction.
A fault has occurred that you cannot resolve. Call Miele.
The cooling fan is switched on. It switches off automatically after a certain period.
– Demo mode is activated. – Deactivate Demo mode (see "Operating and installation instructions").
– The pump for the steam injection system is faulty. – Call Miele.
Carry out the descaling process (see "Operating and installation instructions"). All other
grammes have locked out and cannot be used.
oven functions can still be used.
Energy saving mode Switch the oven back on.
The catalytic cleaning process does not remove Take the catalytic enamelled parts out of the oven and remove this type of soiling with a
spices, sugar and similar deposits. mild solution of hot water and washing-up liquid applied with a soft brush.
Allow the parts to dry and then carefully reassemble them.
– The ingredient quantities used are different from – Check whether there has been a change to the recipe. The addition of more liquid or
those given in the recipe. more eggs makes a moister mix which would take longer to cook.
– A different temperature from the one given in the – Select the temperature required for the recipe.
recipe has been used.
– The material or colour of the baking tin is not suita- – With Conventional Heat  light coloured, shiny tins are less suitable. Use matt, dark
ble for the oven function. coloured baking tins.
– The wrong temperature or shelf level has been – If the unevenness is pronounced, check whether the correct temperature and shelf le-
selected. vel have been selected.
There will always be a slight unevenness.
Replace the lamp with a new halogen bulb (see "Operating and installation instructions").
The bearings in the FlexiClip telescopic runners are Lubricate the bearings with the special Miele lubricant. Only the special Miele lubricant is desi-
not sufficiently lubricated. gned to withstand the high temperatures in the oven. Other lubricants may harden and stick to
the FlexiClip runners when they are heated.The special lubricant is available from Miele.
fold here
fold here
Quick Start Guide
H6267B
These short instructions are not a substitute for the operating and installation
instructions. It is essential to familiarise yourself with the oven before using it for the
first time. Please read the operating and installation instructions carefully and pay
particular attention to the Warning and Safety Instructions.
en – AU, NZ M.-No. 10 950 300
fold here