SCPI Command Subsystems
Table 8: DISPlay command summary
Command
:DISPlay
[ :WINDow[1]]
:TEXT
:DATA <a>
:STATe <b>
:STATe?
:WINDow2
:TEXT
:DATA <a>
:STATe <b>
:STATe?
:SMESsage <b>
:SMESsage?
Table 9: OUTPut command summary
Command
:OUTPut
:TTLn
:LSENse AHIGh|
ALOW
:LSENse?
Description
Path to locate message to top portion of
display
Path to control user text messages:
Define ASCII message "a" (up to 20
characters).
Enable (1 or ON) or disable (0 or
OFF) message.
Read state.
Path to locate message to bottom portion
of display:
Path to control user text messages:
Define ASCII message "a" (up to 32
characters).
Enable (1 or ON) or disable (0 or
OFF) message.
Read state.
Enable (1 or ON) or disable (0 or OFF)
status messages.
Read state of status message display.
Description
Path and command to specify output
line "n" (1-4):
Set polarity; active high (AHIG) or
active low (ALOW).
Read polarity.
27