Tech-Support Commands
show tech-support spaipc
To automatically run show commands that display information specific to SPA Inter Process Communication
(SPAIPC) debugging, use the show tech-support spaipc command in EXEC mode
show tech-support spaipc {terminal [page]| file send-to [background] [compressed| uncompressed]}
[interface type interface-path-id] [show-only] [trace-only] [location node-id| all]
Syntax Description
file
sent-to
background
compressed
uncompressed
interface
type
OL-30353-01
Specifies that the command output is saved to a specified file.
Name of the file. The following valid options are listed:
• filename
• bootflash: filename
• disk0: filename
• disk0a: filename
• disk1: filename
• disk1a: filename
• ftp: filename
• harddisk: filename
• harddiska: filename
• harddiskb: filename
• nvram: filename
• rcp: filename
• tftp: filename
(Optional) Specifies that the command runs in the background.
(Optional) Displays compressed command output.
(Optional) Displays the command output with no compression.
(Optional) Collects information about a specific interface.
Interface type. For more information, use the question mark (?) online help
function.
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
show tech-support spaipc
357