Create A Split Record Feed From Multiple Sources - Axia Fusion Installation And User Manual

• "Upmix from Left" mode
• Define the stream address or Livewire channel number.
• Define the type, again we assume Livewire 2-channel.
• Define the ptime, in the example we define a Livewire Standard Stereo packet.

Create a Split Record Feed from Multiple Sources

You want to create a two channel recording with independent content and gain control for each channel different
from Program 1 of the Fusion console. This single stream will be recorded on a stereo recorder. You can construct a
custom VMode stream to satisfy this requirement, like so:
The resulting Livewire 2-channel output would have the Left side of AUX A on the Left and Left side of AUX B
on the Right.
© 2017 Axia Audio - Rev 3.2