Axia Fusion Installation And User Manual page 14

Select "OK" and your Fusion console's control center will be loaded.
1. From the links under the Mix Engine heading, select Network.
2. Click the Install button displayed at the bottom of the Network page. A new page will load.
3. Enter the value 1 into the Console count field and click the Apply Console Count button.
4. The software will display a list of the consoles found on your network. Select your Fusion from the drop-down list.
5. Click the Apply IP button to set the IP address of your Fusion, and to link it with the StudioEngine.
© 2017 Axia Audio - Rev 3.2