Table of Contents
Advertisement
Source name override:
Three options. Show sourcename will display to the console operator the name applied in Source name
•
(previous item).
•
Allow application to override will permit the display to change based on the LABL value of the source. Not
an option on devices that do not support the LABL property. The LABL property is available on port 93 of
the device.
LOGIN
SRC # LABL:"XCharacter"
SRC # LABL:""
(to restore Source name)
Show both will show both the Source name and application controlled LABL property at the same time.
Primary source:
•
The Livewire channel identification field. Type the channel number in or use the browse button to search
for the source in the network.
Signal mode:
•
Stereo: stereo signal as is (default)
•
Left: left channel of stream only
•
Right: right channel of stream only
•
Sum L+R: sum left and right into mono
Locked (checkbox):
•
if locked, control operator does not have option to change source mode from the surface. The mode is
locked.
Signal phase:
Normal: No modification of phase
•
•
Invert left: reverse the polarity of the left channel
•
Invert right: reverse the polarity of the right channel
•
Invert left and right: reverse polarity of the left and right channel
© 2017 Axia Audio - Rev 3.2
Advertisement
Table of Contents
Need help?
Do you have a question about the Fusion and is the answer not in the manual?
Questions and answers