Clean Printing; Changing Print Quality (Resolution) - Intec CS4000 User Manual

Changing sizes to print
„ Using Windows PCL printer drivers
Note
1
z Pamphlets cannot be printed if printing using encrypted
secure print functions from the client after creating the
printer drivers using a shared network.
z If [Booklet] cannot be printed, right-click the [Intec
(printer name) (PCL6)] in the [Devices and Printers]
folder, and select [Preferences]>[Advanced]>[Print
2
Processor]>[ITX04ZPP].
1
Open the file to be printed.
2
Select [Print] in the [File] menu.
3
3
Click [Advanced] (or [Preferences]).
4
Select [Booklet] in [Finishing Mode] in the
[Setup] tab, and click [Options].
4
5
5
Set [Signature], [2 pages], [Right to
Left], and [Bind Margin] as necessary in
"Booklet".
z Signature
This is the page unit for booklets.
z Right to Left
Prints so that the pamphlet opens on the right.
Memo
z E.g.: If creating A5 size booklets using A4 size paper,
select [A4] in [Paper Size] in the [Setup] tab.
6
Printing will be implemented.
- 58 -

Clean printing

z
Changing print quality
(resolution)
Set [Quality] by aligning to the environment
used.
Memo
z If printing is incorrect using large size paper from the PS
printer drivers, you can correct the printing by setting
"Normal" in [Quality].
z Select [Intec Multi-Level OS4800] to print using the
highest printer quality.
– Select [Normal (600x600 dpi)] to print at low resolution.
This mode prioritizes print speed.
– [Fine/Detail(1200x1200 dpi)] is an intermediate mode
between [Intec Multi Level OS4800)] and [Normal (600x600
dpi)].
z By selecting [Optimize color thin line], characters and/or
lines with color will be printed sharply.
„ Using Windows PS printer drivers
1
Open the file to be printed.
2
Select [Print] in the [File] menu.
3
Click [Advanced] (or [Preferences]).
4
Change [Quality] in the [Job Options]
tab.
5
Printing will be implemented.

Clean printing

„ Using Windows PCL printer drivers
1
Open the file to be printed.
2
Select [Print] in the [File] menu.
3
Click [Advanced] (or [Preferences]).
4
Change [Quality] in the [Job Options]
tab.
5
Printing will be implemented.
- 59 -
1
2
3
4
5