Setting The Server To Print Mail Attachments - Intec CS4000 User Manual

Setting the network from the web browser
Setting the server to print mail
attachments
1
The printer can print the file attached to the
received mail.
Memo
z A maximum of 10 files can be printed. However, the
2
maximum size of the files is 8 MB.
z PDF, JPEG and TIFF files can be printed.
z Some PDF files may not be printed correctly. If files cannot
be printed properly, open the file with Adobe Reader for
printing.
3
„ Setting POP
1
Access the web page of the printer and
log in as administrator.
4
2
Select [Admin Setup].
3
Select [Network Setup]>[Email]>[Receiving
Settings].
5
4
Select [POP3], and click [STEP2].
5
Perform the settings following the on-
screen instructions.
Memo
z Make correct settings for the mail server you are
using. If the APOP protocol is disabled, when you
enable APOP, mails may not be correctly received.
z If you specify a domain name of the mail server, set
the DNS server in the [TCP/IP] setting.
6
Click [Submit].
„ Setting SMTP
1
Access the web page of the printer and
log in as administrator.
2
Select [Admin Setup].
3
Select [Network Setup]>[Email]>[Receiving
Settings].
4
Select [SMTP] and click [STEP2].
5
Perform the settings following the on-
screen instructions.
6
Click [Submit].
- 216 -