Intec CS4000 User Manual page 92

Network setting items
„ MAC address filtering
Item
1
Network
Configuration
Card Setup
Web Page Tool/ Network
Utility
Setting Plug-in
(Mac OS X)
MAC address - -
2
filtering
Notifications - -
3
from the
following MAC
addresses
MAC address 1 - -
to 50
4
MAC address - -
of the
registered
administrator
5
„ Encryption (SSL/TLS)
Item
Network
Configuration
Card Setup
Web Page Tool/ Network
Utility
Setting Plug-in
(Mac OS X)
HTTP/IPP - -
HTTP/IPP - -
encryption
strength
Incoming FTP - -
FTP receiving - -
encryption
strength
SMTP receiving - -
SMTP receiving - -
encryption
strength
Select the type - -
of certificate
used.
Common - -
Name
Organization - -
Organizational Unit - -
Locality - -
Factory
Default Explanation
Settings
Disable Specifies whether to use MAC address filtering.
This function is used to control access from the
MAC address. Make sure to make the following
category settings if enabling MAC address
filtering. Unless these settings are made, the
device cannot be accessed via a network.
Authorization Specifies whether to authorize or deny access
from the specified MAC address.
00:00:00: Specifies the MAC address to which filtering is
00:00:00 applied.
00:00:00: Automatically specifies the administrator MAC
00:00:00 address.
Normally only this address can access the device.
All accesses are authorized via proxy servers if
the administrator accesses the server via a proxy
server.
Factory
Default Explanation
Settings
Disable Specifies whether to encrypt HTTP/IP communications.
Standard Specifies the encryption strength of HTTP/IPP
communication.
Disable Specifies whether to encrypt receiving via FTP.
Standard Specifies the encryption strength of receiving via
FTP.
Disable Specifies whether to encrypt receiving via SMTP.
Standard Specifies the encryption strength of receiving via
SMTP.
Using the Creates your signed certificate. Further, creates
certificate the CSR to be sent to the authenticator, and
signed by you installs the certificate issued by the authenticator.
(Printer IP The device IP address is specified when your
address) signed certificate is created.
(None) Specifies the formal name of the organization
to which the user belongs using 64 single-byte
characters max.
(None) Specifies the name of the sub-group (store, etc.)
to which the user belongs using 64 single-byte
characters max.
(None) Specifies the region name to which the user
belongs using 128 single-byte characters max.
- 174 -
Item
Network
Configuration
Card Setup
Web Page Tool/ Network
Utility
Setting Plug-in
(Mac OS X)
State/Province - - (None)
Country/ - - (None)
Region
Key exchange - - RSA
method
Key size - - 1024bit
„ IPSec
Item
Network
Configuration
Card Setup
Web Page Tool/ Network
Utility
Setting Plug-in
(Mac OS X)
IPSec - - Disable
IP address - - 0.0.0.0
1 to 50
IKE encryption - - AES-CBC 128
Algorithm
IKE hash - - SHA-1
Algorithm
Diffie-Hellman - - Group2
group
Lifetime - - 28800 (s)
Advance - - (None)
common key
Key PFS - - NOPFS
Diffie - - - None
Hellman group
when Key PFS
is enabled
ESP encryption - - AES-CBC 128
Algorithm
ESP - - SHA-1
authentication
Algorithm
AH - - SHA-1
authentication
Algorithm
Lifetime - - 3600 (s)
Network setting items
Factory
Default Explanation
Settings
Specifies the state or prefectural name to
which the user belongs using 128 single-byte
characters max.
Specifies the country code or region code using 2
single-byte characters.
Specifies the key method for encrypted
communications.
Specifies the key size for encrypted
communications.
Factory
Default Explanation
Settings
Specifies whether to use IPSec.
Specifies the host that authorizes
communications using IPSec.
Specifies the IKE encryption method.
Specifies the IKE hash method.
Specifies the Diffie - Hellman group used by
"Phase 1 Proposal".
Specifies the "ISAKMP SA" lifetime.
Specifies the advance common key.
Specifies whether to use Key PFS (Perfect
Forward Secrecy).
Specifies the Diffie - Hellman group used by Key
PFS.
Specifies the algorithm for the ESP encryption
algorithm.
Specifies the algorithm for the ESP authentication
algorithm.
Specifies the AH authentication algorithm.
Specifies the "IPSec SA" lifetime.
- 175 -
1
2
3
4
5