Intec CS4000 User Manual page 111

Setting the network from the web browser
„ Using EAP-TLS
4
Select [Enable] in [IEEE802.1X].
1
5
Select [EAP-TLS] in [EAP Type].
2
3
4
6
Enter the user name in [EAP User].
7
Enable the [Not use SSL/TLS Certificate
5
for EAP authentication] check box.
8
Click [Import of Client Certificate].
The "Import of Client Certificate" screen will
be displayed.
9
Enter the client certificate file name.
Memo
z The importable certificate file format is PKCS#12.
10
Enter the client certificate password,
and click [OK].
The client certificate will be imported to the
printer.
11
Enable [Authenticate Server].
12
Click [Import of CA Certificate].
Memo
z If [Not authenticate Server] is enabled, it is not
necessary to import the CA certificate.
If [Not authenticate Server] is enabled, disable
whether or not to connect to the correct
authentication server.
The "Import of CA Certificate" screen will be
displayed.
- 212 -
13
Enter the CA certificate file name, and
click [OK].
Memo
z The imported CA certificate is the authenticator
certificate issued by the RADIUS server certificate.
z Importable file formats are PEM, DER, and PKCS#7
formats.
The CA certificate will be imported to the
device.
14
Click [Submit].
15
The settings will be save in the printer,
and the network functions will restart.
If the standby screen is displayed in the
control panel, turn OFF the device power
supply.
Reference
z For how to turn OFF the power supply, see "Basic".
z Go to "Connecting the device to the authentication
switch" (P.213).
Setting the network from the web browser
„ Connecting the device to the
authentication switch
Memo
z Check that the device power supply is turned OFF.
1
Insert the LAN cable into the device
LAN (network) interface connector.
2
Insert the LAN cable into the
authentication switch authentication
port.
3
Turn ON the device power supply.
4
Check that the standby screen is
displayed in the control panel.
5
Set the device IP address according to
the environment in use.
- 213 -
1
2
3
4
5