Intec CS4000 User Manual page 102

Setting the network from the web browser
6
Set the phase 1 proposal parameters in
"STEP3".
1
(1)
Select from AES-CBC 256, AES-
CBC 192, AES-CBC 128, 3DES-
CBC, DES-CBC and set in [IKE
Encryption Algorithm].
2
(2)
Select from SHA-1 and MD5, and
set in [IKE Hash Algorithm].
(3)
Select from Group 2 and Group
1, and set in the [Diffie-Hellman
3
Group].
(4)
Enter the range from 600(s) to
86400(s) in [LifeTime] to set.
4
5
7
Set the advance common key in "STEP4".
Enter in [Pre-Shared Key] using 1 to 64
single-byte alphanumerics to set. This
section uses entering "ipsec" in the string
as an example.
8
Set the Key PFS in "STEP5".
(1)
Select from KEYPFS and NOPFS,
and set in [Key PFS].
(2)
If [Key PFS] is selected, select
from Group 2, Group 1,and None,
and set in [Key PFS Diffie-Hellman
Group].
- 194 -
9
Set the Phase 2 proposal in "STEP6".
z Setting [ESP]
(1)
Select from AES-CBC 256, AES-
CBC 192, AES-CBC 128, 3DES-
CBC, DES-CBC and set in [ESP
Encryption Algorithm].
(2)
Select from SHA-1, MD5, and OFF,
and set in [ESP Authentication
Algorithm]. If OFF is selected, the
ESP authentication algorithm is not
applied.
z Setting [AH]
(1)
Select from SHA-1 and MD5,
and set in [AH Authentication
Algorithm].
(2)
Enter the range from 600(s) to
86400(s) in [LifeTime] to set.
Setting the network from the web browser
10
Click [Submit].
11
The settings will be save in the printer,
and the network functions will restart.
- 195 -
1
2
3
4
5