Changing Administrator Passwords - Intec CS4000 User Manual

Setting the network from the web browser
„ Calibration
1
2
3 Item Explanation
Normal Adjusts the print image quality such as the color
Setting densities, etc.
Customize Implements density compensation and color
Menu misalignment compensation.
4
„ Direct Print
5
Item Explanation
Web Printing You can print by specifying a user-selected PDF
file.
Reference
See "Printing without printer drivers (Direct
printing)" (P.215).
„ Job List
Item Explanation
Job List Displays a table of the print jobs sent to the
printer. It is possible to delete unnecessary jobs.
„ Links
Item Explanation
Links Displays the links set by the administrator in
addition to links set by the manufacturer.
Edit Links The administrator can set links they like. You can
register 5 support links and 5 other links. Enter
URLs including http://.
- 186 -
Changing administrator
passwords
You can change the password used when logging
in as a device administrator.
1
Click [Admin Setup]>[Management].
2
Click [Change Password].
3
Enter the new password in [New
Password], and then reenter the new
password in [Verify Password].
Note
z When entering a password, "●●●●●" will be
displayed on screen.
z Enter an alphanumeric password from 6 to 12
characters.
z If entering alphanumerics in the password, correctly
enter capital and small letters.
4
Click [Submit].
Setting the network from the web browser
5
The settings will be saved to the device.
It is not necessary to restart the device.
Use the new password when logging in as
an administrator the next time.
Note
z This password is different from the TELNET password.
When the password is changed here, the password when
logging onto the administrator setup menu in the control
panel will also be changed.
- 187 -
1
2
3
4
5