Intec CS4000 User Manual page 128

Table of setting items in the device setup screen
Item
Paper Feed MPTray
1
Tray1
*1
Tray2
Tray3 *1
*1
Tray4
*1
Tray5
2
*1: The optional expansion
tray unit is displayed when
mounted.
Auto Tray Switch On
Off
3
Tray Sequence Down
Up
Paper Feed
Unit of Measurement inch
millimeter
4
Duplex Last Page Skip Blank Page
Always Print
5
„ System Adjust
Item
Power Save Time
Sleep Time
Auto Power Off Time
Clearable Warning
Auto Continue
z Shaded areas are factory-set values.
Details
Specifies the feed paper tray.
Sets whether to switch automatically to another
tray when the paper in the current printing tray
runs out.
Specifies the selection order of the tray when using
auto tray selection or auto tray switching.
Specifies the units for custom paper sizes.
Skip Blank Page:
Prints the final page as 1-sided when using
2-sided printing on odd-numbered data pages.
Always Print:
Implements regular 2-sided printing.
Not operable with some applications.
z Shaded areas are factory-set values.
Details
1 minute Sets the time until the printer enters power save
2 minutes mode.
3 minutes
4 minutes
5 minutes
10 minutes
15 minutes
30 minutes
60 minutes
1 minute Sets the time until the printer enters sleep mode
2 minutes from power save mode.
3 minutes
4 minutes
5 minutes
10 minutes
15 minutes
30 minutes
60 minutes
1 hour Sets the time until the printer enters OFF mode
2 hours from standby status.
3 hours
4 hours
8 hours
12 hours
18 hours
24 hours
ONLINE Sets the time until clearable warning display turns
Job OFF.
On Sets whether to implement auto printer recovery
Off when a memory overflow or tray request occurs.
- 244 -
Item
Manual Timeout Off
30 seconds
60 seconds
Timeout print Off
5 seconds
10 seconds
20 seconds
30 seconds
40 seconds
50 seconds
60 seconds
90 seconds
120 seconds
150 seconds
180 seconds
210 seconds
240 seconds
270 seconds
300 seconds
Low Toner Continue
Stop
Jam Recovery On
Off
Error Report On
Off
Hex Dump Execute
Table of setting items in the device setup screen
z Shaded areas are factory-set values.
Details
Sets the time to wait for the paper feed during
manual feed.
If paper is not set within the specified time, the job
is canceled.
Sets the time from loss of the receipt of data until
force-printing.
With PS, the job is canceled without printing being
implemented.
Sets the printer operations when toner is detected.
Continue:
Print continuation is possible while online.
Stop:
Device is offline.
Sets whether to implement jam recovery print
when a jam occurs.
Setting [Off] cancels jobs that include pages to
which the jam occurs.
Sets whether to print error reports when an error
occurs in PCL and PS.
Prints the received data in hexadecimal format.
Turns OFF the power when the hexdump print
finishes.
- 245 -
1
2
3
4
5