Intec CS4000 User Manual page 108

Setting the network from the web browser
8
Enable each error to be notified in
[Setting Events Used for Sending Email
Alerts].
1
2
3
4
9
Click [OK].
10
Check the set details of the malfunction
5
notifications conditions.
z Displaying tables
(1)
Click the [Show current settings
table] button.
(2)
Check the set details, and close the
window.
z Comparing the set conditions for 2
addresses
(1)
Use the list box to select each
address to be compared.
(2)
Check the settings details that are
displayed.
Memo
z You can change the notification condition settings
by clicking the set conditions comparison details.
11
Click [Submit].
12
The settings will be save in the printer,
and the network functions will restart.
- 206 -
„ Notifying the occurrence of
malfunctions
1
Click [Email]>[Alert Settings].
2
Enter the mail address of the
malfunction notice recipient.
3
Click the [Setting] button for the e-mail
address that has been set.
Memo
z Click the [Copy] button to copy the malfunction
notice information settings to another address. It is
convenient to set the same malfunction notification
conditions in multiple addresses.
4
Enable the [Upon occurrence of an
event] check box, and click [To STEP2].
Setting the network from the web browser
5
Enable each error to be notified in
[Setting Events Used for Sending Email
Alerts].
6
Set the mail delay time from error
occurrence to sending.
Memo
z You can notify only those errors who continue to
occur over a long time using the delay time settings.
z Set the delay time to "0 Hours 0 Minutes" to send
an e-mail the instant an error occurs.
7
Click [OK].
- 207 -
1
2
3
4
5