Intec CS4000 User Manual page 138

Table of setting items in the device setup screen
„ Power Setup
1
Item
Power Save
Sleep
2
Auto Power Off
„ Others Setup
3
Item
RAM Setup Receive Buffer Size
4
5
Resource Save
Flash Memory Initialize
*1
Setup
Resize PS Area
*1: Displayed
when the
control panel
[Common
storage
settings]>
[Enable
initialization]
is set to [Yes].
z Shaded areas are factory-set values.
Details
Enable Enables/disables power save mode.
Disable
Enable Enables/disables sleep mode.
Disable
Enable Sets auto power OFF mode.
Auto Setting
Disable
z Shaded areas are factory-set values.
Details
Auto Sets the incoming buffer size that is assured by the
0.5 MB local interface.
1 MB
2 MB
4 MB
8 MB
16 MB
32 MB
Auto Sets the resource saving area size.
Off
0.5 MB
1 MB
2 MB
4 MB
8 MB
16 MB
32 MB
Execute Initializes flash memory.
nn% [n.n MB] Sets the Percentage of PS area in the flash memory.
- 264 -
Item
HDD Setup *1*2*3 Initialize Execute
Resize PCL nn% 20%
*1: Displayed
Partition
Common 50%
when the
control panel mm%
[Common
PS ll% 30%
storage
<Apply>
settings]>
[Enable
Format Partition PCL
initialization]
Common
is set to [Yes].
PS
*2: Displayed
Erase HDD Execute
when [Boot
Menu]> [HDD
Setup]>
[Enable HDD]
in the control
panel is set to
[Yes].
*3: Displayed
when the HDD
is mounted.
Storage Check File System *2 Execute
Common
*1
Setup
*2: Displayed when
[Boot Menu]>[HDD
Setup]>[Enable HDD] in the
*1: Displayed
control panel is set to [Yes].
when the
HDD is
Check All Sectors *2 Execute
mounted.
*2: Displayed when
[Boot Menu]>[HDD
Setup]>[Enable HDD] in the
control panel is set to [Yes].
Enable Initialization No
Yes
Security Job Limitation Off
*1
Setup Encrypted job
*2
*1: Displayed Make Secure HDD Execute
when the
HDD (option)
*2: Displayed when [Storage
is mounted
Common Setup]>[Enable
and [Boot
Initialization] is set to [Yes]
Menu] >
on the control panel and the
[HDD Setup]
HDD encryption is disabled.
>[Enable
*3
Make Normal HDD Execute
HDD] is set to
[Yes] on the
control panel.
*3: Displayed when [Storage
Common Setup]>[Enable
Initialization] is set to [Yes]
on the control panel and the
HDD encryption is enabled.
*3
Reset Cipher Key Execute
*3: Displayed when [Storage
Common Setup]>[Enable
Initialization] is set to [Yes]
on the control panel and the
HDD encryption is enabled.
Table of setting items in the device setup screen
z Shaded areas are factory-set values.
Details
Initializes the HDD.
Sets the partition size.
Formats the selected partition.
Deletes all HDD data such that it cannot be
recovered.
Implements management data (FAT information)
recovery, and resolves mismatches between the
actual (free) space in the file system and the free
space displayed.
Recovers defective sector information on the HDD
and file system nonconformances.
Sets whether or not to authorize setup changes
concomitant with HDD and flash memory
initialization.
Sets the job restriction mode controls.
If [Job encryption] is selected, non-encrypted
secure prints will be discarded.
Enables the data encryption function stored on
the HDD. All data stored on the HDD to date
will become unrecoverable when this process is
implemented.
Unlocks the data encryption function stored on
the HDD. All data stored on the HDD to date
will become unrecoverable when this process is
implemented.
Regenerates the encryption key used in the
encrypted HDD. All data stored on the HDD to date
will become unrecoverable when this process is
implemented.
- 265 -
1
2
3
4
5