[Print Statistics] - Intec CS4000 User Manual

Table of setting items in the device setup screen
Item
Language Language Initialize
1
Setup
Font Setup Font Output Mode
Job Cancel Cancel Key Behavior
Setup
2
3
Inquiry Display
Focus Position
Display Timeout
4
5
„ Settings
Item
Reset Settings
Save Settings
Restore Settings *1
*1: Displayed when [Save Settings] is executed on
the control panel.
„ Change Password
Item
New password
Verify Password
z Shaded areas are factory-set values.
Details
Execute Deletes the message files that have been
downloaded.
JIS90 Sets the font output mode.
JIS2004
Short Sets the operations when the device [CANCEL]
Long button is pressed.
Off Short:
Press and hold for 2s max. to cancel the print job.
Long:
Press and hold for 2 to 5s to cancel the print job.
Off:
Disables the [CANCEL] button.
On Sets whether to display the enquiry screen when a
Off job is canceled.
Yes Sets whether to apply [Yes] or [No] focus for
No selection in the job cancellation enquiry screen.
60 Sets the display timeout value for the enquiry
to screen when a job is canceled.
180
to
300
z Shaded areas are factory-set values.
Details
Execute Restores the user menu settings to the factory
settings.
Execute Saves the current menu settings.
Execute Changes the saved menu settings.
z Shaded areas are factory-set values.
Details
**************** Sets a new password to be entered in the
[Administrator menu] and [Boot Menu].
**************** Sets a new password to be entered in the
[Administrator menu] and [Boot Menu] for which
[New password] has been set.
- 266 -

[Print Statistics]

Note
z To enter this menu, it is necessary to enter the [Password].
z In the default factory settings, the password is [0000].
Item
JOB LOG Enable
Disable
Supplies Report *1 Enable
Disable
*1: Not displayed if [Usage Report] is set to
[Disable] on the control panel.
Reset Main Counter *1 Execute
*1: Not displayed if [Usage Report] is set to
[Disable] on the control panel.
Consumables counter reset *1*2 Execute
*1: Not displayed if [Usage Report] is set to
[Disable] on the control panel.
*2: Not displayed if [Supplies Report] is set to
[Disable] on the control panel.
Change New Password ****
*1
Password
Verify Password ****
*1: Not
displayed
if [Usage
Report]
is set to
[Disable] on
the control
panel.
Table of setting items in the device setup screen
z Shaded areas are factory-set values.
Details
Enables/disables the totalization function.
Sets whether or not to display the number of
consumables replacements.
Resets the main counter aggregate value.
Resets the number of consumables replacements.
Sets the new password to be entered in [Print
Statistics].
Sets a new password to be entered in the [Print
Statistics] for which [New Password] has been set.
- 267 -
1
2
3
4
5