Intec CS4000 User Manual page 75

Windows utilities
Registering devices
When using the Configuration Tool for the first
1
time or introducing a new Intec device, register
the Intec device in the Configuration Tool.
1
Select [Start]>[All programs]> [Intec
Printing Solutions]>[Configuration
2
Tool]> [Configuration Tool] to start the
Configuration Tool.
2
Select "Register Device" in the "Tools"
menu to search for Intec devices that
3
can be registered.
4
5
Memo
z To change the scope of the search, select
"Environment Settings" in the "Tools" menu, and
enter the range to be searched. Enter the range,
and click [OK].
3
Enable the check box for the Intec
device to be set and managed, and click
[Register].
4
Click either or [Cancel] in the upper
right of the window to close the
"Register Device" window.
- 142 -
Device Info tab
You can view the Intec device status and
advanced information.
This function is available with the Configuration
Tool as standard.
1
Click the Intec device whose information
you want to view from "Registered
Device Table".
The Intec device status will be displayed.
Memo
z To change the information, click [Update Device
Information].
Note
z The device status will be displayed if an Intec device
is connected to the network.
Windows utilities
Network Setting plug-in
The network can be set using the Configuration
Tool. Before making the settings, install the
Network Setting plug-in.
Reference
z For how to set up the network, see the "Basic".
„ Icon types
The icon meanings are described below.
Icon Explanation
Searches for the device again.
Changes the search conditions.
Changes the device IP address.
Restarts the device.
Changes the network password.
Displays the web page for the
specified device.
„ Searching for devices on the
network
You can search for devices.
1
Select [Network Setting] from the
[Plug-ins] menu.
2
Select [Discover Devices].
The search results will be displayed.
- 143 -
1
2
3
4
5