Intec Lpr Printing Utility > 23; System Requirements; Installing Intec Lpr; Step1: Install The Utility - Intec CP2020 Configuration Manual

I LPR
NTEC
The Intec LPR Utility is a utility that allows sending data to
printers connected to the network via TCP/IP. Can be used as an
alternative to using Microsoft Standard TCP/IP.
The utility redirects printing data to the lpr port of the specified
IP address.
S
YSTEM REQUIREMENTS
Windows 7, XP or 2000 with TCP/IP protocol installed and
printers that support TCP/IP.
I I
NSTALLING NTEC
NOTE
Intec LPR may already be installed if you used the installer
program.
Intec LPR is installed automatically for a network printer when
the driver is installed. Installation consists of two steps:
> Step 1: Install the Utility
> Step 2: Add the Printer to the Utility
S 1:
TEP INSTALL THE UTILITY
NOTE
> Installation on operating systems may require
administrator privileges.
> TCP/IP protocol must be installed in your Windows
system. To install the TCP/IP protocol into your Windows
system consult your Windows manual.
1. Insert the drivers DVD into the DVD-ROM drive and wait
for it to autorun.
If the installer does not start automatically, click Start >
Run and enter E:\Setup (where E is your CD-ROM drive)
in the Open field, then click OK.
2. Accept the Software License Agreement if you have not
previously accepted it and select Software Utilities.
PRINTING UTILITY
LPR
Intec LPR printing utility > 23