Using Snmp - Intec CS4000 User Manual

Using DHCP
„ Using on a BOOTP environment
To use the device on a BOOTP environment, set
1
the IP address setup method to BOOTP.
1
Access the device web page, and log in
as an administrator.
2
2
Select [Admin Setup].
3
Select [Network Setup]>[TCP/IP]>[Change
Settings]>[Get IP address automatically
(BOOTP)].
3
4
Click [Submit].
4
5
- 180 -

Using SNMP

z
Use SNMP manager compatible with SNMPv3 to encrypt the device controls using SNMP.
1
Access the device web page, and log in
as an administrator.
2
Select [Admin Setup].
3
Select [Network Setup]>[SNMP]>[Setup].
4
Implement advanced setup by following
the on-screen instructions.
5
Click [Submit].
6
The network will restart, and the new
settings will be enabled.
Memo
z The device is mounted to the SNMP agent. You can use a
commercially-available SNMP agent to check and change
the device settings. For the device MIB, see the "Software
DVD-ROM", and check the "ASN" file in the [Misc]>[MIB
Files] folder.
- 181 -
Using SNMP
1
2
3
4
5