Simulating Print Effects - Intec CS4000 User Manual

Matching Colors Using the Printer Drivers
„ Using Mac OS X printer drivers
1
Open the file to be printed.
1
2
Select [Print] in the [File] menu.
3
Click the [Quality 1] button in the
2 [Print Options] tab, and select the print
misalignment calibration method using
[Trapping].
3
4
4
5
Printing will be implemented.

Simulating print effects

The ink characteristics used in offset printing,
etc., by adjusting the CMYK color data is
simulated by the device.
The ICC profiles registered as standard are
described below.
z RGB profile
– sRGB
– AdobeRGB
z CMYK input profile
– SWOP
– ISO Coated
– Japan Color
– JMPA
z CMYK link profile
– SWOP
– ISO Coated
– Japan Color
– JMPA
Note
z Cannot be used with Mac OS X printer drivers depending
on the application.
z Enabled when [Color Mode] is set to either [Office Color]
or [Graphic Pro].
- 126 -
„ Using Windows PS printer drivers
1
Open the file to be printed.
2
Select [Print] in the [File] menu.
3
Click [Advanced] (or [Preferences]).
4
Select [Graphics Pro] in [Color Mode]
in the [Color] tab, and then click
[Advanced].
5
Select [Printer Simulation], and then
select the ink characteristics to be
simulated using [Simulation Target
Profile].
Memo
z For business documents, etc., you can select [Office
Color] in the [Color] tab in Steps 4 and 5, and then
click [Advanced], and select the ink characteristics
to be simulated using [CMYK Input Profile].
6
Click [OK].
7
Printing will be implemented.
Matching Colors Using the Printer Drivers
„ Using Windows PCL printer drivers
1
Open the file to be printed.
2
Select [Print] in the [File] menu.
3
Click [Advanced] (or [Preferences]).
4
Click [Detail] in the [Setup] tab, and
select [Graphic Pro].
5
Select [Printer Simulation], and then
select the ink characteristics to be
simulated using [Simulation Target
Profile].
6
Click [OK].
7
Printing will be implemented.
- 127 -
1
2
3
4
5